brazing是什么意思 brazing的中文翻译、读音、例句

词义：brazing是一种金属连接工艺，通过高温加热和填充流动金属连接两个或多个金属。与焊接相比，brazing需要较高的温度和较高的压力，但是可以连接不同类型的金属，并且具有较高的强度。

词性：动词（现在分词为brazing）

词组搭配：

1. brazing torch：焊接枪。

2. brazing rod：铜焊丝。

3. brazing alloy：铜焊剂。

4. brazing flux：铜焊剂。

5. silver brazing：银焊接。

6. hard brazing：硬焊接。

7. vacuum brazing：真空焊接。

短语：无

发音拼写：/ˈbreɪzɪŋ/

七个中英文翻译例句：

1. Brazing is commonly used in diverse industries such as automotive, refrigeration, and aerospace.

铜焊接在汽车、制冷和航空等不同行业中广泛应用。

2. For brazing, it is important to properly clean and prepare the suces to be joined.

对于铜焊接，正确清洁和准备要连接的表面非常重要。

3. The brazing process requires a high temperature of 800°C to 1200°C.

铜焊接过程需要高温800℃至1200℃。

4. Brazing can join dissimilar metals such as copper and steel.

铜焊接可以连接不同的金属，如铜和钢。

5. The brazing technique is preferred for joining thin metal sheets.

铜焊接技术是连接薄金属板的首选。

6. Silver brazing is often used in jewelry .

银焊接常用于珠宝制作。

7. The use of brazing in the construction of heat exchangers is common.

在制造换热器时使用铜焊接是很普遍的。

brazing的意思是焊接，是指一种加热金属并填充液态金属来连接两个金属部件的方法。

中文翻译：焊接

读音：[ˈbreɪzɪŋ]

例句：

1. Brazing is a commonly used method for joining metal parts.

焊接是连接金属部件的常用方法。

2. The brazing process involves heating the metal parts and then adding a filler metal to join them together.

焊接过程涉及加热金属部件，然后添加填充材料将它们连接在一起。

brazing的意思是"钎焊、形式"，其中文解释还有"的"的意思，在线发音：['breiziŋ]，brazing来源于英语，在《郎文当代中级英语辞典》中，共找到21个与brazing相关的例句。

Brazing的翻译

1.钎焊

例句:The reasons are given why weak carbonizing flame of oxyacetylene is used for heating and why brazing seam area can't be polished. (论证了加热时氧——乙炔焰用微碳化焰的原因及焊缝结合区不能采用抛光的道理。)

2.形式

例句:A solder paste used for brazing was developed and its technical performance was investigated. (研制了铝硬钎焊用钎料膏，对其工艺性能进行了研究。)

3.的

例句:Effects of fillers and brazing parameters on mechanical properties and microstructures of brazed joints were investigated. (研究了钎料类型及钎焊工艺对钎缝接头力学性能与微观结构的影响。)

4.用锌铜合金钎接、的

例句:Describes the advantages of the jointly-designed three-chamber vacuum brazing furnace and the construction of vacuum mup and solders used for it. (翻译:叙述了真空保温杯的种类，保温时间及使用寿命，联合设计三室真空钎焊炉的优点以及真空杯的钎焊焊料、结构。)

用法及短语

brazing一般作为名词、动词使用，如在diffusion brazing(扩散硬钎焊)、dip brazing(沉浸钎焊)、electric brazing(电热铜焊)等常见短语中出现较多。

例句

1. Effects of fillers and brazing parameters on mechanical properties and microstructures of brazed joints were investigated. (翻译:研究了钎料类型及钎焊工艺对钎缝接头力学性能与微观结构的影响。)

2. Describes the advantages of the jointly-designed three-chamber vacuum brazing furnace and the construction of vacuum mup and solders used for it. (翻译:叙述了真空保温杯的种类，保温时间及使用寿命，联合设计三室真空钎焊炉的优点以及真空杯的钎焊焊料、结构。)

3. Structure and Property of Graphite and TZM Brazing Bonding with Ti Filler (翻译:钛基钎料钎焊石墨与TZM合金接头组织和性能研究)

4. Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing. (翻译:在高温环境下，铜也表现很好，而且易于通过焊接或钎焊进行连接。)

5. Brazing is one of the proper approaches in joining titanium alloys with huge bonding areas. (翻译:就钛合金大面积之接合技术而言，使用硬焊制程通常为较佳的选项之一。)

6. The primary purpose of this research is focused in vacuum brazing SP-700 high-strength titanium alloys using various Ti-based braze alloys. (翻译:本研究主要的目标在于以多种钛基填料真空硬焊接合SP-700高强度钛合金。)

7. Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing. Wrot coper is exclusively used for fittings. (翻译:在高温环境下，铜也表现很好，而且易于通过焊接或钎焊进行连接。铜专门用作配件材料。)

8. It indicates the strong retention of brazing alloy to diamond grits and the longer service life of the wheel. (翻译:这表明钎料合金对磨粒的高强度把持和砂轮的高耐用度。)

9. ALUMINIUM AND ALUMINIUM ALLOYS. WELDING, BRAZING AND BRAZE WELDING. BASE MATERIALS AND SELECTION OF FILLER MATERIALS. (翻译:铝和铝合金.焊接、硬钎焊和钎焊.基础产品和焊条的选择)

10. Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing. (翻译:锻造铜在高温应用中具有很好的性能，易于采用焊接或铜焊进行连接。)

11. Join pipes using couplings, clamps, screws, bolts, cement or soldering, brazing and welding equipment. (翻译:使用联接器，夹子，螺钉，螺栓，水泥或焊接，钎焊和焊接设备连接管件。)

12. Fins are attached to the plates by a mechanical fit, gluing, soldering, brazing, welding, or extrusion. (翻译:翅片靠机械配合、粘结、软焊、硬焊、焊接或挤压附着在板上。)

13. The brazing formulations are robust with good ductility and have minimal embrittled phases or otherwise decreased braze integrity. (翻译:钎焊制剂坚固并具有良好延性，并具有最少的脆化相或以其它方式降低的钎焊完整性。)

14. Rated internal pressure is that of the tube being joined. While solders can be used, brazing alloys are recommended. (翻译:H额定内部压力是所连接的管道额定内部压力。如果可以采用焊料，则推荐使用铜焊合金。)

15. Also can be used for brazing steel and stainless steel, hard alloy of flux. (翻译:也可作钎焊钢及不绣钢、硬质合金的助熔剂。)

需要加入英语学习交流群的请扫微信
或微信搜索jiemingpan